Blog

How Bulletproof Are Bulletproof Vests? | HowStuffWorks

In August 2017, 30-year-old New York Police Department officer Hart Nguyen was shot while responding to a call regarding a 29-year-old Andy Sookdeo, an emotionally distraught man. As Nguyen approached the door to a bedroom where Sookdeo had barricaded himself, he was shot three times — once in the arm, and twice in his bulletproof vest. He survived. "His vest definitely saved his life," tweeted NYPD Police Commissioner James O'Neill after the attack.

In 2016, 23-year-old Joaquin Mendez of Tampa, Florida, was killed by a gunshot to the chest. According to the local CBS affiliate, Mendez sat in a chair, put on a bulletproof vest, and wondered if it worked. His friend, 24-year-old Alexandro Garibaldi, pulled out a pistol and shot the vest to find out. The bullet pierced the vest and killed Mendez. Uhmwpe Plate

How Bulletproof Are Bulletproof Vests? | HowStuffWorks

As these two stories demonstrate, bulletproof vests do indeed save lives, but they are not always, um, bulletproof or perfect. Do bulletproof vests degrade over time, and can they fail?

Early bulletproof vests were mainly made from poly-paraphenylene terephthalamide — better known as Kevlar. It was invented by Stephanie Kwolek, a chemist working for DuPont in the early 1960s.

DuPont had already invented Nylon and Spandex and was on the hunt for the next generation of high-performance fibers. Synthetic fibers are created with polymers — large molecules composed of repeating subunits, effectively creating a chain of molecules. Nylon, for instance, is a polymer made from hexamethylenediamine, an organic compound, and adipic acid, an ingredient often found in Jell-O. Kevlar is made from molecules para-phenylenediamine, often used in antioxidants and as dyes, and terephthaloyl chloride.

What Kwolek discovered would eventually become Kevlar and would see application in tires, racing sails and bulletproof vests.

Bulletproof vests today are made from polyethylene fibers — a popular plastic polymer seen in nearly everything we use: grocery bags, toys, plastic trash bins and so on. Polyethylene fibers (or "PE" as it's called), are woven in layers to form the guts of a protective vest that is cheaper and stronger than Kevlar. In 1989, AlliedSignal developed a competitor for Kevlar and called it Spectra Shield. Originally used for sail cloth, the polyethylene fiber is now used to make lighter, yet stronger, non-woven material for use in bulletproof vests alongside the traditional Kevlar.

According to Tom Nardone, president and founder of BulletSafe, a manufacturer of bulletproof vests, the layers inside a vest are designed to reduce the velocity of a round to a point below supersonic — faster than the speed of sound — so the fibers can have time to react to the bullet and exert their toughness on the bullet. The more layers, or the greater the density of the weaving of layers, the greater the toughness of the fibers — a measure of their strength and how much they will bend before they break — and the more capable they are of stopping a bullet.

Most pistols fire bullets at velocities that are slightly above the speed of sound. A bullet from a 9mm travels around 984 feet (380 meters) per second, roughly 164 feet/second (50 meters/second) faster than the speed of sound. Slugs from shotguns travel even slower. A good vest doesn't need to work hard to bring a 9mm bullet or shotgun shell's velocity down to a point where it can make use of the toughness of its fibers.

A rifle bullet, however, is another matter entirely. Depending on the grain and quality of the propellant, a bullet fired from an AR-15 travels, roughly, 3,300 feet/second (1,005 meters/second), nearly three times the speed of sound. It'll take a far greater density of ballistic fiber to stop that bullet.

"Supersonic rounds need plates to shatter the bullet into pieces," Nardone says. Most vests designed to stop rifle bullets are backed up with high density insert plates made from ceramics and polyethylene to break up a bullet into pieces and capture it.

"A PE vest with a [rifle] round, that bullet would be going faster than the speed of sound for so long that it would go through until the vest failed," Nardone says.

The material of the vests themselves is also prone to break down for various reasons. Kevlar, for instance, degrades when exposed to salt — such as the salt in human sweat. The longer a person exerts themselves while in a bulletproof vest made of Kevlar — to the tune of years — the greater the likelihood of failure. Vests made from PE also will break down over time when exposed to UV light.

"There is a five-year lifespan on vests. Sometimes people are buying older, used vests, mostly police-work vests, [from back when] they didn't have as high a level of protection," Nardone says.

According to The Baltimore Sun, in 2014, Darnell Mitchell and his friend Mark Ramiro were recording a "Jackass"-style prank for the internet. Mark would shoot Darnell while Darnell wore a bulletproof vest. Both were intoxicated. Mark leveled a .22 caliber pistol at his friend of 15 years and pulled the trigger. Darnell died and Mark was sentenced to four years in prison.

How Bulletproof Are Bulletproof Vests? | HowStuffWorks

Nij Iii M80 Ak47 Military Ballistic Plate Please copy/paste the following text to properly cite this HowStuffWorks.com article: