Remee Wire & Cable, a domestic wire and cable manufacturer, has advanced its commitment to support solar and wind energy projects by offering turnkey cabling solutions, due in part to the addition of new production lines dedicated to the manufacturing of these renewable energy cables. Every offering in the Renewables by Remee line of cables is UL-listed.
Renewables by Remee are made in the United States and one of the few domestic manufacturers to offer stranded copper and aluminum cable with XLPE jackets. Remee is committed to supporting the recent reshoring trends and governmental efforts to develop the renewable energy industry in the United States. Argb 24 Pin Psu Extension Cable
Remee Wire & Cable’s turnkey cabling solutions cover virtually every application in solar and wind fields to interconnect equipment with power and/or data transmission, including:
Solar Array Cables – Stranded bare copper PV wire, all cables feature cross-linked polyethylene (XLPE) jackets for durability. They are offered in a variety of conductor sizes, ranging from 4/0 to 14 AWG and from 250 kcmil to 1000 kcmil. Solar array cables are rated at 1 kV/2 kV or 600 V and are UL 4703 listed. In addition, these cables comply with all applicable requirements of UL 44, UL 854, UL 1581, as well as NFPA 70. These single-conductor photovoltaic (PV) wires are manufactured for use in solar farms to connect solar panel arrays or other electrical components to intermediate collection points.
Collection (DC Feeder) Cables – Stranded aluminum conductors (AA-8000 Series Aluminum Alloy) with cross-linked polyethylene (XLPE) jackets for durability. These DC Feeder cables are rated at 1kV/2kV and are offered in a variety of conductor sizes, ranging from 4/0 to 6 AWG and 250 kcmil to 1000 kcmil. Operating temperature range is -40°C to +90°C (90°C wet or dry). In addition to UL 4703, these cables comply with all applicable requirements of UL 44, UL 854 and IEEE 1202 FT4 (for sizes 1/0 and larger). DC Feeder cables are used to connect intermediary collection points to central control units or solar panels to a combiner box.
Power Equipment Cables – RHH/RHW-2/USE-2 and WTTC type cables feature stranded conductors for use in delivering power from wind turbines to collection points. In solar fields, power equipment cable delivers power between intermediate collection points. RHH/RHW-2/USE-2 cables are 600V rated and offered in sizes ranging from 4/0 to 14 AWG, and 250 kcmil to 1000 kcmil. These cables feature stranded bare copper or tinned copper conductors and XLPE jackets. RHH type cables comply with the requirements of UL 44 and UL 854. High stranded bare copper WTTC type cables are available in 6 AWG and 10 AWG with XLPE insulation and PVC jackets and are rated at 1 kV. They comply with UL 758, UL 2277, AWM 2587, and CSA C22.2 No. 210 and 239.
MV (Medium Voltage) Primary Distribution Cables – Both the stranded aluminum and copper MV Series are rated 35 kv; they feature tree-retardant cross-linked polyethylene (TR-XLPE) insulation and a cross-linked polyethylene (XLPE) jacket. Aluminum MV cables are offered in conductor sizes ranging from 1/0 to 4/0 AWG, and from 500 kcmil to 1500 kcmil. Copper MV cables are offered in conductor sizes ranging from 1/0 to 4/0 AWG and 250 kcmil to 1250 kcmil.
News item from Renewables by Remee
Kelsey has spent almost seven years in the renewable energy space and is the current managing editor of Solar Power World.
Purple Sleeved Psu Cables Copyright © 2024 WTWH Media LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media Privacy Policy | RSS